Our Clients
Description
This grey PVC plastic rod range offers a practical and versatile engineering material for machining, fabrication and general industrial use. Manufactured from rigid unplasticised PVC, these rods provide a good balance of mechanical strength, dimensional stability and chemical resistance.
Available in a choice of diameters from 18mm up to 30mm and in standard lengths from 500mm through to 2000mm, these PVC rods are ideal for producing custom components, spacers, bushes, jigs, fixtures and profiles used across workshops, production lines and maintenance departments.
Product Features
- Material: rigid grey PVC rod suitable for machining and fabrication.
- Diameter options: from 18mm up to 30mm to suit a wide variety of component sizes.
- Length options: 500mm, 1000mm and 2000mm standard lengths for flexible cutting and minimal waste.
- Colour: neutral grey finish for a clean, professional appearance in industrial environments.
- Good dimensional stability, allowing accurate turning, milling and drilling operations.
- Supplied as solid rod stock ready for further processing or on-site modification.
- Suitable for indoor use in dry and damp environments where corrosion resistance is required.
Key Features and Benefits
- Easy to machine, drill and saw using standard workshop tools, helping to reduce fabrication time and tooling costs.
- Corrosion-resistant alternative to metal for components exposed to moisture, many chemicals and cleaning agents.
- Lightweight compared with metal bar, improving handling safety and reducing load on assemblies and equipment.
- Consistent, predictable properties across the rod length for reliable performance in repeat production.
- Grey colour helps to hide marks and wear in busy industrial, workshop or plant-room settings.
- Multiple diameter and length options help minimise waste material and allow closer matching to finished part dimensions.
Specifications
| Specification | Detail |
|---|---|
| Material | Rigid unplasticised PVC (polyvinyl chloride) |
| Colour | Grey |
| Available diameters | 18mm to 30mm (including 18mm, 20mm and further intermediate sizes) |
| Available lengths | 500mm, 1000mm and 2000mm rod lengths |
| Form | Solid cylindrical rod |
| Typical service environment | Indoor industrial, workshop and general engineering applications |
Applications and Ideal Uses
These grey PVC rods are suited to a wide range of engineering, fabrication and maintenance tasks where a durable, corrosion-resistant plastic stock material is required.
- Machined components such as spacers, bushes, rollers and mounting blocks.
- Jigs, fixtures and supports for production and assembly lines.
- Non-conductive and corrosion-resistant parts for electrical and plant-room installations.
- Prototype and small-batch parts in workshops and fabrication shops.
- General maintenance, repair and replacement of worn plastic components.
Frequently Asked Questions
Can these grey PVC rods be machined with standard workshop tools?
Yes, the rods can be cut, drilled, turned and milled using standard metalworking or woodworking tools with appropriate speeds and feeds. Sharp tools and correct clamping are recommended to achieve a clean finish.
Are the PVC rods suitable for outdoor use?
The rods are primarily intended for indoor use. While PVC has good weathering resistance, prolonged exposure to strong sunlight and outdoor conditions may affect appearance and long-term performance, so additional protection or an alternative material may be advisable for permanent outdoor installations.
Can the rods be glued or bonded to other materials?
Yes, PVC rods can be bonded using suitable PVC or multi-purpose plastic adhesives, provided the surfaces are clean, dry and properly prepared. Always follow the adhesive manufacturer’s instructions and carry out a small test where critical performance is required.