Our Clients
Description
This pedestrian traffic cable protector ramp is a robust, low-profile solution designed to shield cables and hoses from damage while providing a safer crossing point for foot traffic. Manufactured from durable material and sized at 135mm x 20mm x 1000mm, it offers reliable protection in both indoor and outdoor environments.
Ideal for workplaces, events, public pathways and temporary installations, this hose and cable ramp helps to reduce trip hazards and maintain a tidy, professional appearance wherever electrical leads, data cables or small hoses need to cross pedestrian walkways.
Product Features
- Single-piece pedestrian cable protector ramp for everyday foot traffic
- Compact size: 135mm width x 20mm height x 1000mm length
- Low 20mm profile to minimise trip risk and ease pedestrian crossing
- Suitable for routing light-duty hoses and electrical or data cables
- Manufactured from hard-wearing material for repeated use
- Textured upper surface to aid underfoot grip
- Straight 1m section for simple, linear cable runs
Key Features and Benefits
- Reduces trip hazards by keeping loose cables and hoses neatly contained within a clearly defined crossing point.
- Protects cables from crushing, scuffing and general wear, helping to extend service life and reduce replacement costs.
- Low overall height allows pedestrians, trolleys and light equipment to cross more comfortably.
- Highly visible ramp profile helps to draw attention to the crossing area and improve site safety.
- Easy to position, remove and store, making it ideal for temporary or changing layouts.
- Suitable for use in a wide range of environments, from warehouses and workshops to retail spaces and events.
Specifications
| Specification | Detail |
|---|---|
| Product type | Pedestrian traffic cable protector ramp |
| Overall size | 135mm (W) x 20mm (H) x 1000mm (L) |
| Intended traffic | Pedestrian and light-duty trolley traffic |
| Typical cable capacity | Suitable for routing small cables and light-duty hoses (up to approx. 20mm overall height) |
| Material | Durable, impact-resistant construction suitable for repeated use |
| Installation | Free-standing on level surfaces; can be repositioned as required |
Applications and Ideal Uses
This cable protector ramp is suitable for any location where cables or light-duty hoses must cross pedestrian walkways and require both protection and improved safety.
- Warehouses, factories and workshops with temporary or semi-permanent cable runs
- Exhibitions, conferences and events where power and data leads cross footpaths
- Retail, hospitality and public buildings needing tidy, safer cable management
- Temporary site setups, pop-up installations and maintenance works
- Education, healthcare and office environments with mobile equipment cabling
Frequently Asked Questions
Is this cable protector ramp suitable for vehicle traffic as well as pedestrians?
No, this ramp is designed primarily for pedestrian use and light trolleys. For areas used by cars, vans or heavier vehicles, a heavier-duty, vehicle-rated cable ramp should be selected.
What size cables can I run through this protector?
This ramp is suitable for smaller electrical, data and audio-visual cables, as well as light-duty hoses, up to approximately the 20mm overall height of the ramp. Always ensure that cables sit comfortably within the ramp profile without causing a raised trip point.
Does the ramp need to be fixed to the floor?
In many applications the ramp can be used free-standing on a clean, level surface. In higher-traffic or more permanent installations, additional fixing or securing methods may be used if required, following any site safety and building guidelines.