Our Clients
Description
This modular hose and cable ramp provides a robust, raised crossing point to protect hoses, cables and small pipes from vehicle and pedestrian traffic. Manufactured from tough, impact-resistant material, it helps prevent crushing, abrasion and trip hazards in busy working environments.
Designed around a single modular size of 535mm x 295mm x 118mm, each section can be used alone for smaller areas or linked together to create longer runs. Ideal for warehouses, construction sites, events, workshops and loading bays, it offers a practical way to manage temporary or semi-permanent hose and cable routes.
Product Features
- Modular hose and cable ramp section measuring 535mm x 295mm x 118mm
- Interlocking design allows multiple units to be connected to form longer runs
- Raised profile gives clear visibility of crossing points for vehicles and pedestrians
- Robust construction engineered to withstand heavy-duty industrial use
- Textured upper surface to help improve grip for foot traffic
- Suitable for protecting hoses, electrical leads and small service pipes
- Compact section size for easy handling, storage and transport
Key Features and Benefits
- Protects vital services by helping to prevent crushing, kinking and abrasion of hoses and cables.
- Reduces trip hazards by clearly routing and containing trailing leads across traffic areas.
- Modular format provides flexibility to adapt to different lengths, layouts and site requirements.
- Durable construction offers a long service life, even in demanding industrial and commercial settings.
- Simple to install, reposition and remove without the need for permanent fixings or specialist tools.
- Compact dimensions make it convenient to store when not in use or transport between sites.
Specifications
| Specification | Detail |
|---|---|
| Product type | Modular hose and cable ramp |
| Overall size (L x W x H) | 535mm x 295mm x 118mm |
| Configuration | Single modular section, interlocking with additional sections |
| Typical use | Protection of hoses, electrical cables and small pipes from traffic |
| Installation | Free-standing, portable; no permanent fixings required |
| Material | Heavy-duty moulded plastic suitable for industrial environments |
Applications and Ideal Uses
This modular hose and cable ramp is suitable for a wide range of temporary and semi-permanent traffic management and cable protection tasks, both indoors and outdoors.
- Warehouses, factories and workshops to protect power leads and air lines across walkways
- Construction and maintenance sites to route hoses and temporary services safely across access roads
- Events, exhibitions and hospitality venues to manage trailing cables in public areas
- Garages and service bays to protect fuel lines, hydraulic hoses and diagnostic leads
- Loading docks and distribution centres where hoses or cables cross vehicle routes
Frequently Asked Questions
How many modular sections do I need to create a crossing?
The number of sections required depends on the total width of the area you need to span. Each section is 535mm long, so you can divide the total distance by 535mm and round up to determine how many ramps are needed. Additional sections can be added later if your layout changes.
Can this ramp be used with both pedestrian and vehicle traffic?
Yes, the ramp is designed for mixed-use environments where both pedestrians and vehicles may cross. However, you should always assess the specific site conditions and traffic types, and ensure the ramp is placed on a stable, level surface. Check that the hoses or cables being protected are compatible with the loads expected.
Is any permanent fixing required to keep the ramp in place?
No, the ramp is intended as a free-standing, portable solution and does not normally require permanent fixings. For additional stability, make sure the surface is clean and level, and consider the direction of traffic so that vehicles cross the ramp squarely rather than at an angle.