Our Clients
Description
These premium faux translucent stone sheets in white provide the look of natural stone with the practicality of a lightweight plastic sheet. Designed for interior applications, they allow light to pass through for striking backlit effects while maintaining an attractive, consistent white stone appearance.
Ideal for designers, shopfitters, and interior contractors, these sheets are easy to cut, shape, and install compared with traditional stone. Use them to create feature walls, illuminated bar fronts, decorative partitions, and bespoke display elements without the weight, cost, or maintenance demands of real stone.
Product Features
- Translucent white stone-effect finish for premium interior aesthetics.
- Manufactured in a practical 8 mm thickness for strength and reduced weight.
- Standard sheet length of 2440 mm suitable for most wall and panel applications.
- Sheet width of 1220 mm to match common interior fit-out and joinery dimensions.
- Lightweight plastic construction for easier handling and installation than natural stone.
- Consistent colour and pattern for seamless joins across multiple sheets.
- Low-maintenance surface that is easy to clean and keep looking fresh.
Key Features and Benefits
- Achieve a high-end stone look without the structural reinforcement and heavy fixings associated with real stone panels.
- Translucent properties enable creative backlighting, allowing you to produce eye-catching illuminated features in bars, receptions, and retail spaces.
- Easy to cut and fabricate using standard tooling, reducing installation time and on-site labour costs.
- Durable, impact-resistant material that is less prone to chipping and cracking than many natural stone finishes.
- Non-porous surface resists staining and moisture ingress, making day-to-day cleaning simple and reliable.
- Stable sheet size and uniform thickness promote accurate alignment and a professional finish across large installations.
Specifications
| Specification | Detail |
|---|---|
| Material | Translucent stone-effect plastic sheet for interior use |
| Colour / Finish | White, faux stone appearance with light-transmitting properties |
| Thickness | 8 mm (nominal) |
| Sheet Length | 2440 mm (approx. 2.44 m) |
| Sheet Width | 1220 mm (approx. 1.22 m) |
| Typical Use | Interior decorative and architectural applications, including backlit features |
Applications and Ideal Uses
These faux translucent stone sheets are suited to a wide range of interior design and architectural projects where a stone-like, light-enhancing finish is required without the weight of real stone.
- Backlit bar fronts, counters, and reception desks in hospitality and office environments.
- Feature walls and decorative panels in hotels, restaurants, and retail stores.
- Illuminated display surrounds, shelving back panels, and point-of-sale fixtures.
- Decorative partitions and room dividers that benefit from transmitted light.
- Lift lobbies, corridors, and entrance areas requiring a premium but practical wall finish.
Frequently Asked Questions
Can these faux translucent stone sheets be used in exterior applications?
These sheets are designed primarily for interior use. While they may be used in covered or sheltered areas, they are not intended for prolonged exposure to outdoor weathering, and performance may be affected if installed externally.
How can I cut and shape the sheets on site?
The sheets can typically be cut using standard woodworking tools such as circular saws with fine-tooth blades, jigsaws, or routers, following normal safety precautions. Always support the sheet properly during cutting and perform a trial cut on an offcut if you are unsure of the setup.
Are these sheets suitable for direct contact with high-temperature sources such as cookers or hobs?
No, the sheets are not intended for direct contact with high heat or open flames. If used in kitchen or catering environments, ensure they are installed at a safe distance from hobs, ovens, or other heat sources, and follow any relevant building and safety guidance.