Our Clients
Description
This premium flexible low density polythene hose is designed for low pressure transfer applications where reliability, ease of handling and chemical resistance are essential. Manufactured from quality LDPE, it offers excellent flexibility while maintaining shape and integrity during use.
Suitable for a wide range of environments including workshops, laboratories, light industrial processes and general maintenance tasks, this hose is ideal for conveying compatible liquids and gases at temperatures up to 50°C. Supplied in practical coil lengths and diameter packs, it is convenient to store, cut and install as required.
Product Features
- Available outside/inside diameters from 4 mm (pack of 4) to 12 mm (pack of 2) to suit a variety of low pressure connections.
- Small-bore options: 4 mm (pack of 4), 5 mm (pack of 3) and 6 mm (pack of 3) for finer control and compact systems.
- Larger-bore options: 8 mm, 10 mm and 12 mm (each supplied in packs of 2) for higher flow in low pressure applications.
- Multiple coil lengths available, including 2.5 m, 3 m, 4 m, 6 m, 8 m, 9 m and 10 m to minimise waste and optimise installation.
- Manufactured from flexible low density polythene for easy routing around equipment and within confined spaces.
- Chemical-resistant composition suitable for a wide range of compatible industrial fluids and cleaning solutions.
- Designed for use up to a maximum working temperature of 50°C in low pressure systems.
Key Features and Benefits
- Excellent flexibility reduces kinking and makes installation straightforward, even in tight or complex layouts.
- Chemical resistance helps protect against premature degradation when used with suitable detergents, process fluids and laboratory reagents.
- Choice of diameters and coil lengths allows closer matching to system requirements, reducing cutting waste and overall project cost.
- Lightweight construction makes the hose easy to handle, transport and reposition as systems are altered or extended.
- Smooth internal bore supports efficient low pressure flow and is simple to flush through and clean.
- Durable LDPE material provides a cost-effective alternative to rigid pipework in low pressure duties.
Specifications
| Specification | Detail |
|---|---|
| Material | Low density polythene (LDPE) |
| Available outside/inside diameters | 4 mm (pack of 4), 5 mm (pack of 3), 6 mm (pack of 3), 8 mm (pack of 2), 10 mm (pack of 2), 12 mm (pack of 2) |
| Available coil lengths | 2.5 m, 3 m, 4 m, 6 m, 8 m, 9 m, 10 m |
| Maximum working temperature | Up to 50°C (low pressure applications) |
| Pressure suitability | For low pressure transfer and general service duties |
| Construction | Flexible single-wall polythene hose, smooth bore |
Applications and Ideal Uses
This flexible polythene hose is a versatile choice for light-duty transfer and distribution in clean, technical and general industrial environments.
- Laboratory and workshop fluid transfer for compatible chemicals, coolants and cleaning solutions.
- Low pressure air, water and inert gas lines in maintenance and service areas.
- Light industrial process lines where flexible routing is preferred over rigid tubing.
- Drainage, siphoning and decanting tasks in maintenance, facilities management and catering preparation areas.
- Temporary or semi-permanent low pressure connections in test rigs and development setups.
Frequently Asked Questions
Can this polythene hose be used with any type of chemical?
No, it should only be used with chemicals that are compatible with low density polythene. Always check the chemical resistance of LDPE against the specific fluid, concentration and temperature you intend to use, and if in doubt carry out a small-scale trial or consult your safety data information.
Is this hose suitable for high pressure or compressed air systems?
No, this hose is designed for low pressure applications only. It is not intended for high pressure systems or safety-critical compressed air lines. For those duties, an appropriate reinforced or rated pressure hose should be selected.
Can I cut the hose to a custom length and fit it to standard hose barbs?
Yes, the hose can be cut to size using a sharp knife or tube cutter, ensuring a clean, square edge. It is suitable for use with correctly sized hose barbs or push-on fittings for the relevant diameter, and secure fastening with clips or clamps is recommended where necessary.